Table of Contents
Advertisement
Managing drivers
Checking the driver installation
When the computer restarts, check that the device is working properly.
To verify the driver's installation, proceed as follows:
1
From the Start menu, click Control Panel.
The Control Panel window appears.
2
Click on the Printers and Other Hardware icon.
3
Click the System icon.
The System Properties dialog box appears.
4
Click the Hardware tab, then click Device Manager.
The Device Manager window appears.
5
Double-click the option corresponding to the device you installed, then double-click your device.
The Properties dialog box appears.
6
Make sure that the This device is working properly message is displayed under Device status.
7
Click OK.
Close all the opened windows, your device is ready for use.
The device is not working properly in the following cases:
❑
Your device is shown in Device Manager with a yellow question or exclamation mark.
Right-click your device and click Uninstall. Then repeat from step 2 in Installing a driver
❑
Double-clicking the category of your device in the device manager list does not display your device.
You have to remove your device. Please refer to Uninstalling a driver
repeat from step 2 in Installing a driver
❑
Double-clicking Other devices displays your device.
You have to right-click your device, then click Uninstall. Repeat from step 2 in Installing a driver
(page
77).
(page
77).
n N
78
(page
(page 80)
to remove it. Then
77).
Advertisement
Table of Contents
