Adding Memory - Sony PCV-RX402 User Manual

Upgrading your VAIO computer

Adding memory

In the future, you may want to install memory modules to expand the functionality of your computer. You
can increase the memory by installing optional memory modules, although we recommend that you do not
install them yourself unless you are familiar with upgrading memory on a computer.
Be careful when adding memory. Mistakes on installation or removal of the memory module may cause a
malfunction.
For memory upgrades, use only PC-2100 DDR SDRAM DIMM.
Electrostatic discharge can damage electronic components. Before touching a memory expansion board,
remember the following:
❑
Handle the memory module gently.
❑
The procedures described in this document assume familiarity with the general terminology associated
with personal computers and with the safety practices and regulatory compliance required for using and
modifying electronic equipment.
❑
Disconnect the system from its power source and from any telecommunication links, networks, or
modems before you open the system. Failure to do so may result in personal injury or equipment
damage.
❑
Electrostatic Discharge (ESD) can damage memory modules and other components. Install the memory
module only at an ESD workstation. If such a station is not available, do not work in a carpeted area, and
do not handle materials that produce or hold static electricity (cellophane wrappers, for example).
Ground yourself by maintaining contact with an unpainted metal portion of the chassis while
performing the procedure.
❑
Do not open the memory module package until you are ready to install the module. The package
protects the module from ESD.
❑
Use the special bag delivered with the memory module, or wrap the module in aluminium foil to protect
it from electrostatic discharge.
n N
73