Download Print this page
Mercury 799.046UK User Manual

Mercury 799.046UK User Manual

17 inch kettle charcoal grill

Advertisement

Quick Links

17 Inch Kettle Charcoal Grill
Item ref: 799.046UK
User Manual
Assembly and Safety Instructions
- FOR OUTDOOR USE ONLY -

Advertisement

loading

Summary of Contents for Mercury 799.046UK

  • Page 1 17 Inch Kettle Charcoal Grill Item ref: 799.046UK User Manual Assembly and Safety Instructions - FOR OUTDOOR USE ONLY -...
  • Page 2: Important Safeguards

    IMPORTANT SAFEGUARDS Definitions Whenever used, the following identify safety and property damage messages and designate a level of hazard seriousness. - This is the safety alert symbol. It alerts you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
  • Page 3 WARNING - To reduce the risk of fire or serious personal injury: • Use of alcohol or prescription/non-prescription drugs may impair the user’s ability to properly assemble or safely use the product. Do not use this product if you are under the influence of alcohol or prescription/non-prescription drugs.
  • Page 4 CAUTION - To reduce the risk of personal injury: • This product is intended solely for outdoor, non-commercial, non- industrial use in cooking foods for human consumption. Do not use the product indoors or for any other purpose. • Do not use attachments not recommended or sold for this product by the product manufacturer.
  • Page 6 To Assemble: Tools required (not included): wrenches (7mm or 9/32”, 8mm or 5/16”, and 13mm or ½”), small and large Phillips screwdrivers. 1. Attach the Vent to the Lid (see Fig. 1): a. Align the holes in the Vent (H1) with the holes in the Lid (A).
  • Page 7 b. Insert the Bolt (N) through the Vent and Lid. Tighten the Nut (O) onto the Bolt (N). Hold the Bolt in place using a small Phillips screwdriver and tighten the Nut using a wrench. 2. Attach the Handle and the Lid Hanger to the Lid (see Fig.
  • Page 8 e. Repeat steps b. and d. for the remaining Cups and Legs. 6. Attach the Wire Shelf and the Wheels (see Fig.6): a. Insert the short prongs of the Wire Shelf (J) into the holes in the Front Legs (F). b.
  • Page 9 8. Place the Charcoal Grid (D) into the Bowl, crossbars facing down. Follow with the Cooking Grid (C), handles facing up. Slide the Ash Catcher (E) into the leg under the Bowl (see Fig. 7). 9. Place the Lid onto the Bowl.
  • Page 10: Care And Maintenance

    To Use: WARNING: • To avoid burns, always wear protective oven mitts or non-flammable, heat-resistant gloves while using the Grill. • Do not touch hot surfaces. • Always use heat-resistant utensils with long handles when using the Grill. 1. Place charcoal in a pile on the Charcoal Grid. 2.
  • Page 11 warm water, and a mild soap. Wipe the remaining parts with a damp sponge. − To remove baked on debris from the Grids, soak them for about 15 minutes in warm water. For the assembled Bowl, pour warm water into it and let it soak. Then use the scrubbing side of a sponge. −...