Sony PCV-RS202 User Manual page 39

Connecting peripheral devices
6 Click nView Display Mode on the left.
7 Select the Device Settings button.
8 Click Select Output Device... and select the desired display.
9 Click OK.
If you reboot after changing the settings as above, the default setting returns and the image is shown on
the VGA screen again. If you want the image to be shown on both the DVI and the TV after rebooting, please
disconnect the VGA.
Similarly, if you have all three displays connected and want the computer to select DVI and TV when you
start your computer, simply make your settings again.
n N
38