Table of Contents
Advertisement
Using Click to DVD (for models with DVD-RW)
Select the Pictures check box to create a DVD of pictures, and then select the picture playback
method.
Select the Create Album option to advance manually during DVD playback without background
music.
Select the Create Slide Show option to have your pictures advance automatically during DVD
playback.
You can select background music for slide shows.
8
If you want to save your project to continue working on it later on, you can do so by clicking M (Menu)
and then clicking Save Project or Save Project as...
Alternatively, if you want to open a saved project to continue working, click M (Menu), click Open
Project... and select the saved project.
Recording videos
When capturing video from a digital video device, you can either:
Automatically capture all the video on the tape from the beginning of the tape (automatic capture),
or
Select and download a portion of the video (manual control).
Recording videos automatically (automatic capture)
To record videos automatically, proceed as follows:
1
Connect an i.LINK™ cable between the digital video device and the computer, and then set the device
to VCR/VTR mode.
2
Click Capture Video in the step guide.
The Capture Video screen appears.
3
Select Automatic Capture in the Capture Selection box.
If the Rewind Tape check box is selected, the tape is rewound to the beginning before capturing begins.
n N
87
Advertisement
Table of Contents
