Filter Replace; Additive Reset; Regenerate Filter - Sealey AUTO SERVICE VS8626 Instructions

Note: As part of the process, a clear codes message will be sent to the vehicle (any faults that are permanent on
the vehicle will remain until the fault is fixed).
(See list on reverse)
(See list on reverse)
(See list on reverse)
3.2.
3.2.1. Press the Function button to select the appropriate system
3.2.2. Press Mode button to select correct type (Filter Replace).
3.2.3. Press the 'OK' button to perform the function.
3.2.4. Once the function has completed, the Mode LED will flash to
3.2.5. If the function is unsuccessful, the 3 System Selection LEDs

Filter Replace

3.3.
3.3.1. Press the Function button to select the appropriate system
3.3.2. Press Mode button to select correct type (Additive Reset).
3.3.3. Press the 'OK' button to perform the function.
3.3.4. O nce the function has completed, the Mode LED will flash to
3.3.5. If the function is unsuccessful, the 3 System Selection LEDs

Additive Reset

3.4.
3.4.1. Press the Function button to select the appropriate system
3.4.2. Press Mode button to select correct type (Regenerate Filter).
3.4.3. Press the 'OK' button to perform the function.
3.4.4. Once the function has completed, the Mode LED will flash to
3.4.5. If the function is unsuccessful, the 3 System Selection LEDs
NOTE: Regeneration takes around 15 mins in total (2 mins running

Regenerate Filter

Original Language Version
Filter Replace
(There is a full list of systems on the rear of the tool).
indicate a successful reset.
will flash.
Additive Reset
(There is a full list of systems on the rear of the tool).
indicate a successful reset.
will flash.
Regenerate Filter
(There is a full list of systems on the rear of the tool).
indicate a successful reset.
will flash.
at idle, 8 mins at 4000rpm and then 5 mins at idle). Ensure
that rear / exhaust area of the vehicle is kept clear of people
for this period.
VS8626 Issue: 1 - 19/07/10