Logitech ZONE WIRELESS Complete Setup Manual page 5

3 If foam cushion is damaged, please follow
the steps below
a Peel the foam cushion off and replace
with a new one
b Place the tape on the top of the ear cup first
c Then attach the foam cushion to the tape
4 Grasp the new earpad cover, making sure that the
small holes on the side align with the top and bottom
of the ear cup It should align with the USB C port at
the bottom
5 Starting from the top, slot the edge of the earpad
cover inside the gap Put the edge of the cover into
the gap around the earcan
Foam cushion Tape Ear cup
5 English