Advertisement
Available languages
Available languages
EN
This manual contains important information that should be kept for
future reference.
Self-assembly.
Warning! Keep children away from the assembly area. Leave the
plastic bags out their reach. The small parts pose a choking hazard.
Sleeping size
Mod.A: 160x200 cm
Mod.B: 180x200 cm
Material
Bedding box
Structure: solid pine, particleboard.
Cover: 100% polyester.
Suspensions: Bonell springs.
Headrest
Structure: solid pine, particleboard.
Cover: 100% polyester.
Padding: polyurethane foam 30 kg/m
130g/m
3
.
Thickness : 15 cm.
Feet : polypropylene.
Mattress
Twill : 100% polyester.
Padding: polyuretane foam 44 kg/m
Suspension : pocket springs.
Thickness: 23 cm.
Topper
Twill : 100% polyester.
Padding : visco foam 40 kg/m
Thickness: 4 cm.
Feet
Solid oak lacquered.
Assembly Instructions
Before beginning assembly, identify ail components using the manual.
ln order not to lose components, do not throw the package before
completing the full assembly.
Using an electric screwdriver is strongly discouraged.
This product must be assembled by an adult.
Plan to assemble the furniture as near as possible to where you want
to install.
Assemble on a clean, fiat surface.
Recommendations for use
This product is designed for indoor use only.
Do not jump on the product.
Beware of sharp objects.
Leo - 09/2021
3
, wadding
3
, polyuretane foam 30kg/m
3
.
Maintenance
Do not place the product near a source of heat
(radiator, chimney ...) or a source of moisture. Heat and moisture can
damage the product.
Do not use abrasive cleaners.
Fabric coating
Avoid direct and prolonged exposure of the product to sunlight: colors
may fade.
Vacuum or brush the upholstery once a week: dust
accumulation accelerates wear and tarnishes.
Blot the spilled liquids immediately with a clean, dry
cloth dabbing to absorb the liquid. Do not rub, it may
damage the fabric. Variations in color between
cleaned and uncleaned surfaces could occur.
Mattress/Topper
A slight settlement of the order of 15% can be observed on the surface
and contact elements, this is normal and can not in any case lead to
the implementation of the guarantee.
To mitigate this phenomenon, simply tap the surface of the mattress
regularly.
Turn the mattress and mattress pad each month with two identical
faces.
Ventilate the bedroom regularly and do not cover the bed during the
day.
3
.
Avoid direct and prolonged exposure of the mattress and mattress
to solar radiation.
If in doubt, contact a professional to carry out the cleaning.
Keep the label with lot number, it may be useful in case of
BC
complain.
If you have any comments or suggestions regarding this product,
assembly instructions or service received, please enquire at your
nearest store or contact us on our website at: www.habitat-design.com
or write to this address: HABITAT, 70 AVENUE VICTOR HUGO, 93300
AUBERVILLIERS FRANCE.
1
Advertisement
