Koyker KB660 Owner's Manual page 15

TRANSPORTING
Follow the simple steps listed below when preparing the backhoe for transporting between work sites.
1. Before transporting the backhoe, raise the boom, dipper, and bucket to transporting position.
2. Engage the boom lock to lock the boom to the swing post in the transporting position. Replace
lock pins to secure boom lock. See in Fig. 1-1
3. Raise all stabilizers.
CAUTION!
OPERATING INSTRUCTIONS
Be sure to install a SMV (Slow Moving Vehicle) sign on the backhoe dipper
before attempting to transport the backhoe.
When transporting the backhoe on a road or highway at night or during the
day, use accessory lights and devices for adequate warning to the operators of
other vehicles. In this regard, check local government regulations.
Always drive slowly over uneven terrain to avoid tipping the backhoe.
Fig. 1-1
Page 13