Related Manuals for Optim Stickvac
Summary of Contents for Optim Stickvac
- Page 1 STICKVAC Cordless convenience to give you the freedom to clean your home quickly and easily.
- Page 3 O2300 Stickvac Congratulations on the purchase of your new Optim Stickvac. There are many useful features built into your stickvac. We recommend that you carefully read this instruction manual for the best results. Features: 1. Handle 7. Dust Bin Release Button 2. Stickvac On/Off Button 8. Dust Bin 3. Handle Release Button 9. Powerhead Release Button 4. Handvac Release Button 10. Powerhead 5. Handvac 11. Battery Indicator 6. Handvac On/Off Button 12. LED Lights Accessories: 13. 2-in-1 Cleaning Tool (Dusting 15. Charger Brush & Crevice Tool) 14. Charging Base Specifications: Voltage: 14.8V Lithium Power: 90W (105W with the powerhead) Weight: 2.07kg (0.96kg handvac only)
-
Page 4: Before You Begin
Before You Begin This cleaner must be operated in accordance with these instructions and only used for domestic household cleaning to remove DRY dirt and dust from household carpets, flooring, walls and fabrics. This cleaner is not fit to be used as an industrial cleaner and will void the manufacturer’s warranty if used inappropriately. PLEASE READ THESE INSTRUCTIONS THOROUGHLY. This will ensure you obtain full benefit from your new cleaner. Keep this Instruction Manual in a handy place for future reference. IMPORTANT Always switch off the cleaner before cleaning, when not in use, attempting any maintenance task, fitting or removing accessories. The charger must only be connected to an AC power supply at the voltage shown on the rating label. This cleaner should only be charged with the charger provided. This cleaner should only be used for its intended purpose as described in these instructions. PRECAUTIONARY MEASURES: 1. Do not operate the vacuum cleaner too close to heaters, radiators, and other hot surfaces. 2. Before inserting the power plug into the power supply, make sure your hand is dry. 3. B efore turning on the vacuum cleaner, remove any large or sharp objects from the floor or cleaning surface in order to prevent damage to the filter. 4. When removing the power plug from the power supply, do not use the power cable, gently pull the power plug from the power supply. 5. Do not use this vacuum cleaner to pick-up water or liquids. -
Page 5: Safety Precautions And Warnings
Safety Precautions & Warnings IMPORTANT! Always switch off the appliance before cleaning, when not in use or attempting any maintenance task. The charger must only be connected to an AC power supply at the voltage shown on the rating label. This cleaner should only be used for its intended purpose as described in this instruction manual. - Page 6 9. Do not handle or operate the 18. Before carrying out any appliance with wet hands and maintenance service or cleaning follow electrical safety precautions the filters, always switch off the at all times. vacuum cleaner. 10. Extreme caution should be 19. Keep openings away from your exercised when using the face and body. appliance on stairs. 20. Do not use the vacuum cleaner 11. Do not attempt to change the if it is damaged or broken. If attachments while the appliance connection cables are damaged, is switched on. Use only have them replaced immediately. manufacturer’s recommended 21. Never clean the vacuum accessories. cleaner or any of the electrical 12. Do not operate the vacuum parts, especially the electrical cleaner too close to heaters, connections with water or liquid radiators and other hot surfaces. cleaners.
- Page 7 29. Damage caused by improper use or by not observing the instructions in this manual will void the warranty. BATTERY USE AND CARE battery may cause irritation or burns. 1. The battery can only be 6. Do not charge or store the replaced by a qualified technician. Do not try to open cleaner outdoors or inside the car. Only charge or store the cleaner to replace the the battery or cleaner in a battery. Failure to do so may dry indoor area where the cause risk of injury and fire. temperature is more than 5˚C 2. The appliance is only to be but less than 45˚C. used with the charging base 7. Never attempt to open the uniquely provided with the battery for any reason. If the appliance. plastic housing of the cleaner 3. Only charge the battery inside breaks or cracks, immediately the product and only use the discontinue use and do not...
- Page 8 Assembly IMPORTANT! Always ensure that the cleaner is turned off before fitting or removing accessories. ASSEMBLY 1. Place the powerhead onto the floor and insert the main body into the powerhead as shown. 2. Lift the handle upwards until it clicks into position. Note: The handle can be folded by pressing the Handle Release Button and folding the handle backwards. 3. Insert the handvac into the main body until it clicks into place.
- Page 9 Instructions for Use WARNING! The charger has been specially designed to charge the Optim Stickvac. Do not use any other charger. CHARGING 1. Plug the charger into the charging base socket then place the cleaner onto the charging base. 2. When the battery indicator lights are flashing green, the vacuum cleaner is charging. When the battery indicator lights turn off, the cleaner is fully charged. NOTE: When the battery indicator light is flashing green during use, it means that the battery requires charging.
-
Page 10: Using The Handvac
USING THE STICKVAC 1. Unlock the stickvac by placing one foot onto the powerhead and tilting the handle backwards. 2. Press the Stickvac On/Off Button to turn on the stickvac. USING THE HANDVAC 1. Remove the handvac from the main body by pressing the Handvac Release Button. 2. Press the Handvac On/Off Button to switch on the handvac. 3. The 2-in-1 Cleaning Tool can be connected to the handvac for above the ground cleaning or for cleaning hard to reach areas. USING THE 2-IN-1 CLEANING TOOL IMPORTANT! Always ensure that the cleaner is turned off before fitting or removing accessories. -
Page 11: Maintenance
Maintenance IMPORTANT! Always ensure that the cleaner is turned off before preforming any maintenance. EMPTYING THE DUST BIN 1. Detach the handvac from the main body by pressing the Handvac Release Button. 2. Press the Dust Bin Release Button to access the dust bin. 3. To empty the dust bin, remove the filter and filter cone by pulling on the filter tabs. -
Page 12: Filter Assembly
3. To clean the filter, separate the filter from the filter cone as shown. It is recommended to replace the filter every 6 months to maintain the filtration and cleaning performance of the cleaner. The filter cone can be disassembled and cleaned by twisting and separating the lower and upper parts of the filter cone. FILTER ASSEMBLY 1. Reinsert the filter and filter cone into the dust bin ensuring that the filter cone is connected to the air inlet as shown. - Page 13 CLEANING OR REPLACING THE BRUSH ROLL IMPORTANT! Always ensure that the cleaner is turned off before preforming any maintenance. 1. Detach the powerhead from the main body by pressing the Powerhead Unlock Release Button. Using a coin or a screwdriver turn the brush roll locking tab to the Unlock symbol to access the brush roll. 2. If a build-up of debris is wound around the brush roll, remove by carefully cutting with a scissors. Avoid damaging or cutting the bristles. 3. To reinsert the brush roll insert the left side of the brush roll, then insert the right side into the powerhead and turn the brush roll locking tab to the Lock symbol.
-
Page 14: Troubleshooting
Troubleshooting PROBLEMS AND SOLUTIONS If you come across a problem, please use the checklist of troubleshooting tips before contacting Optim Customer Care: 1800 815 270 (AUS) or 0800 282 288 (NZ). FAULT CAUSE SOLUTION Cleaner will Flat battery Place the cleaner onto the charging base for charging not switch on / Power indicator flashes green The cleaner The cleaner is not Place the cleaner onto the charging placed properly base can’t be onto the charging charged Plug the power plug into a power base socket The charging base Connect the charging cable to the is disconnected charging base from the power supply Reduced Dust bin filter is not Reinstall the filter installed suction Empty the dust bin... -
Page 15: Spare Parts
Spare Parts Please contact Optim Customer Care: 1800 815 270 (AUS) or 0800 282 288 (NZ) to find your local spare parts provider. Dust Bin Filter 32201557 Charging Base 33201563 Charger 33201565 Brush Roll 33788097... - Page 16 STICKVAC Conditions of warranty Your Optim cleaner, in the case of domestic use, Home-Aids Pty Ltd. If Electrical Home-Aids Pty has a 1 year parts and labour warranty against Ltd decide to repair or replace the cleaner, it will product defects and failures when the product is do so at its own cost. used in accordance with the terms and conditions Electrical Home-Aids Pty Ltd is unable to accept of this warranty statement.
Need help?
Do you have a question about the Stickvac and is the answer not in the manual?
Questions and answers