Summary of Contents for Jaypro Sports VBWR-1
- Page 1 -- VOLLEYBALL WALL MOUNT, VBWR-1 -- Installation Instructions Call Jaypro Sports Equipment at 1-800-243-0533 during regular business hours for technical support. www.jaypro.com Rev-A Page 1 of 6...
- Page 2 VOLLEYBALL WALL MOUNT, VBWR-1 PARTS LIST (QTY: SINGLE UNIT) ITEM IMAGE DESCRIPTION VOLLEYBALL WALL RACK P/N: VBWR-101 VELCRO STRAPS P/N: VBWR-102 VINYL EDGE TRIM P/N: RP5064 FIBERGLASS SPACER P/N: VBWR-104 1/4"-20 x 4” HEX HEAD CAP SCREW P/N: HS5373 1/4"-20 NYLON LOCK NUT P/N: HN256 1/4"...
- Page 3 3) USE OF THIS EQUIPMENT OTHER THAN INTENDED, MAY BE HAZARDOUS. 4) ALTERATION OR MODIFICATION OF THIS EQUIPMENT MAY BE HAZARDOUS AND RESULT IN INJURY. FOR REPAIR OR REPLACEMENT, CONTACT YOUR DEALER OR JAYPRO SPORTS. Tools Require: Hammer Tape Measure...
- Page 4 INSTALLATION AND USE CONSIDERATIONS 1) Do not locate wall storage rack in or adjacent to heavy traffic areas. The stored volleyball uprights and/or the rack may pose a hazard to those in the vicinity. 2) The straps provided with this unit when properly used, will safely hold an upright which weighs 85 pounds or less.
- Page 5 ASSEMBLY INSTRUCTIONS 1) Affix two rubber strips to each wall rack cradle. These will help to protect the finish on your standards. 2) The wall rack should be securely anchored to the wall using a suitable anchor chosen for the type of wall being mounted to, whether CMU block, poured concrete or studded.
- Page 6 4) When storing the upright in the wall rack, a minimum of two trained adults should carry the unit. Be sure the upright stands vertical with no lean. Strap the upright into the cradle by wrapping the velcro straps (2) around as tight as possible. 1/4"-20 x 4”...