Table of Contents
Advertisement
Starting the programme
The programme can be started when
the Start/Stop sensor control is flashing
on and off.
Touch the Start/Stop sensor control.
The Start/Stop sensor control lights up
constantly.
Status
Time left
Cottons
Drying
and the programme duration re-
maining will light up in the display.
The laundry will be cooled down shortly
before the end of the programme.
Tip: In the pull-down menu you can
view the selected drying level or dura-
tion and the energy consumption.
With programmes with a selectable dry-
ing level,
PerfectDry
ual moisture present in the laundry to
ensure precise drying results. If a small
load or dry laundry is placed in the
dryer, it is dried/aired for a preset dura-
tion.
11:02
1:42
h
Machine iron
PerfectDry
Add laundry
calculates the resid-
5. Starting a programme
The
PerfectDry
display will only light up
with programmes with selectable drying
levels:
- Hollow point after a programme
has started
The drying level reached will still be
shown later on.
- Solid point when the drying level is
reached
The time left for the drying level pro-
grammes can vary or "jump". It de-
pends on the load quantity, type of
laundry, residual moisture in the laundry
or water hardness.
ally adapts, constantly increasing the
accuracy of the time left.
To prevent laundry wearing out
avoid overdrying it.
Energy savings
After 10 minutes, the indicators dim and
the Start/Stop sensor starts flashing.
Touch the Start/Stop sensor to switch
the indicators on again (this does not
have any effect on a running pro-
gramme).
The drum lighting switches off once the
programme has started.
Adding laundry
You can add laundry items after the
programme has started.
Follow the description in "Changing
the programme sequence – Adding or
removing laundry".
PerfectDry
continu-
35
Advertisement
Table of Contents
