Advertisement
Quick Links
CONCRETE VIBRATOR
PENDULUM TYPE
VP38 - VP44 - VP57
OPERATING INSTRUCTIONS
38 mm
44 mm
57 mm
WARNING
To reduce the risk of injury, all operators and maintenance personnel must read and understand
these instructions before operating, changing accessories, or performing maintenance on Flextool
power equipment. All possible situations cannot be covered in these instructions. Care must be
exercised by everyone using, maintaining or working near this equipment.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Flextool VP38
Summary of Contents for Flextool VP38
- Page 1 To reduce the risk of injury, all operators and maintenance personnel must read and understand these instructions before operating, changing accessories, or performing maintenance on Flextool power equipment. All possible situations cannot be covered in these instructions. Care must be...
- Page 2 HAZARDS AND RISKS Equipment NEVER allow any person to operate equipment without ade- The goal of Flextool is to produce power equipment that helps quate instruction. the operator work safely and efficiently. The most important safety device for this or any tool is the operator. Care and good ENSURE all operators read, understand and follow the operat- judgement are the best protection against injury.
- Page 3 Information regarding compaction of concrete using immersion Check the outer casing rubber cover for damage where it vibrators is available in a FLEXTOOL FACT SHEET. enters the ferrule at the vibrator head. Damage is caused by operators using a crane to retrieve a vibrator trapped in con- Check that a petrol or diesel engine is running at 3,000 r/min.
- Page 4 Vibrating heads are fitted with left hand screw threads on the WARRANTY nose cap, barrel and flexible shaft casing. FLEXTOOL products are covered by warranty for a period of Dismantle the vibrating head and the flexible shaft every 500 six (6) months from the date of purchase against defects in working hours.
Need help?
Do you have a question about the VP38 and is the answer not in the manual?
Questions and answers