Start A Session - NeuroTek Elite Series Quick Start Manual

A. Turn on Tac by holding the center power button for
5 seconds
6

Start A Session

B. Do you have an EyeScan? If yes, continue below. If no,
see step C.
A. Turn on Tac by holding the center power button for 5
Ensure your EyeScan is turned on. On your Tac,
o
seconds
Select Settings, then select Wireless Devices.
B. Do you have an EyeScan? If yes, continue below. If no,
Your tac will automatically scan for wireless devices.
see step C.
Once your device is found, it will show up on your
Ensure your EyeScan is turned on. On your Tac,
o
Tac. Select the device by hitting enter and then a
Select Settings, then select Wireless Devices. Your
check mark will appear next to the device. Arrow
tac will automatically scan for wireless devices.
down and select connect. OK will appear next to
Once your device is found, it will show up on your
the device.
Tac. Select the device by hitting enter and then a
check mark will appear next to the device. Arrow
Select Back until you get back to the Main Menu
o
down and select connect. OK will appear next to
the device.
Select Back until you get back to the Main Menu
o
©NeuroTek 2020 Version 2.0