Quick Start - NeuroTek Elite Series Quick Start Manual

4

Quick Start

To begin session, hold the middle button for
o
approximately 5 seconds to turn the device on.
Plug in your pulsers and or headset into the side of the
o
Tac. If you have an EyeScan see #4 of the manual on
how to pair the EyeScan to the Tac. If you don't you can
continue to the next step.
On the main screen, you will see the words Resource
o
(which is slower speeds), and Reprocessing (which is higher
speeds). These are 2 preset profiles that you can use to
get started. You do have the ability to change the settings
if needed. Select which option you prefer. Once selected,
the curser will automatically go down to Start Session.
Press the middle button to select Start Session, and your
session will begin. Your pulsers, headset, and EyeScan
will begin to work.
Once they are running, if you want to adjust the speed of
o
your devices, the volume of your headset, the settings on
the EyeScan, or the intensity of your pulsers, you will use
the arrows to select one of the icons in the middle of the
screen. There will be a square box around the icon once
it's selected. So, the hand is for pulsers, the headset, is
for your headset, the eye is for the EyeScan, and the last
icon, a clock is for speed. Once the box is around the one
you want, press the middle button to select it, and the
options to adjust the speed, volume, mode, or intensity
will appear. Use the arrows to make the adjustments that
you want up or down.
©NeuroTek 2020 Version 2.0