Monitor Failure Diagnosis; Check Failure Diagnosis Page - Contec CONPROSYS Alpha Series Reference Manual

5. Monitor Failure Diagnosis

1. Check Failure Diagnosis Page

1
Refer to "PLC-Backup" menu (Page47) to start Web browser.
2
From "PLC-Backup" menu, select [Failure Diagnosis]. The figure below appears.
3
"Diagnosis State" of each PLC is displayed in 1-5 respectively.
(The item turned on red indicates the error occurs.)
4
Click the "Menu" button to go back to the "Menu" page.
— —
PLC-Backup
CPSA-PCB100 Reference Manual
— 74 —