Contec CONPROSYS Alpha Series Reference Manual page 114

MELSEC-Q series by Mitsubishi Electric
Item
LAN connection
Serial connection
*1 Parameter should be already installed into CPU by system tool (mfd. By Mitsubishi Electric) to
restore program/parameter. CPU needs to be reset once after restoring.
Note that program/parameter cannot be backed up if the product is connected to CPU with
Ethernet port integrated.
*2 The backup range of ZR/D by serial communication is up to 999999.
MELSEC-FX series by Mitsubishi Electric
Item
LAN connection
Serial connection
—
Appendix
CPSA-PCB100 Reference Manual
ZR
D
Program/Parameter
ZR
D
Program/Parameter
R
D
R
D
—
Backup Range
0 to maximum value should be set within the parameter
setting range.
0 to maximum value should be set within the parameter
setting range.
Backup is possible without the program
capacity/parameter type settings.*1
0 to maximum value should be set within the parameter
setting range.*2
0 to maximum value should be set within the parameter
setting range. *2
Backup is possible without the program
capacity/parameter type settings.*1
Backup Range
0 to maximum value should be set within the range CPU
can be used.
0 to maximum value should be set within the range CPU
can be used.
0 to maximum value should be set within the range CPU
can be used.
0 to maximum value should be set within the range CPU
can be used.
— 114 —