Table of Contents
Advertisement
Central remote controller
5
Various Functions
5-1. Air conditioner
Setting the Operation Details
You can check the current settings of the air conditioner or ON/OFF device and set the details of the operation method.
Displaying the "Menu" screen
Menu items
Setting items
Filter Sign Reset*
Ventilation
Energy saving operation
Key lock
Louver setting in Group*
* You need to enter a password. For information about how to enter a password, see " Entering the administrator password".
Entering the administrator password
1
Display the "Control" screen of All, Zone, or Unit (P.15).
2
Press [
The "Menu" screen is displayed.
3
Select an item using [∧] and [∨], and then press [
(Confirm).
For the checks and settings of the individual items, see below.
The displayed items differ depending on the control range.
Used to cancel the Filter Sign.
Used to control the Air to air heat exchanger (ventilation-only indoor unit)
linked with the air conditioner. This menu item is available when only the Air
to air heat exchanger is used.
Used for energy-saving operation that limits the output of the air conditioner.
Not displayed on the Unit "Menu" screen.
Used to restrict the local remote control operation.
Used to disable Louver setting in Group.
1
In the "Admin. Password Entry" screen, select where to enter
the password using [<] and [>], and change the number by
pressing [∧] and [∨].
2
After entering the administrator password, press [
(Confirm).
] (Control).
Description
Owner's Manual
]
Page to
see
P.48
P.49
P.51
P.52
P.53
]
-EN
47
Advertisement
Table of Contents
