Using The Foot Switches - Boss Dr. Rhythm DR-670 Owner's Manual

Quick Start

Using the Foot Switches

You can use up to two foot switches (such as the optional FS-5U) to start and stop
performance and insert fill-ins.
* When only one foot switch is connected, the foot switch only starts and stops performances.
* A special PCS-31 cable (optional) is required when connecting two foot switches.
fig.00-31
White
(Start/Stop performance)
Foot switches connected with plugs that have a white stripe are used for starting and
stopping performances; foot switches connected with plugs that have a red stripe are used
for fill-ins.
To prevent malfunction and/or damage to speakers or other devices, always turn down the
volume, and turn off the power on all devices before connecting a foot switch.
When connecting the foot switch (the optional FS-5U) to the FOOT SW jack, set the polarity
switch as shown in the following figure.
fig.00-32
34
PCS-31: option
Red
(Fill-Ins)
Polarity Switch