Table of Contents
Advertisement
Contents
Connections
0 When hanging the sound bar on a wall, use the included wall mount template.
How to use the wall mount template
A Tape the template to the location you would like to mount the sound bar.
Leave enough space between the TV and the sound bar so that the sound from the Atmos speakers on the top of the bar, which projects towards the ceiling, is not
blocked by the TV. Refer to the table on the previous page for spacing recommendations. (v p. 16)
B Screw in the wall mount screws by following the template.
Screw in one self-tapping screw (commercially available, 3/16 in./5 mm to 1/4 in./6 mm diameter) into a wall that has sufficient strength to support the weight of the sound
bar, or into reinforcing material on the wall.
C Remove the template from the wall.
D Mount the included wall mount spacers on the back of the sound bar.
The wall mount spacers create a space for cords to pass through between the sound bar and the wall.
E Hang the sound bar on the screws.
Playback
Settings
13/32 in./10.5 mm
More than 13/16 in./20 mm
17
Tips
Appendix
Advertisement
Table of Contents
