Seconique Furniture Carlow 3 Assembly Instructions

SEC/WG/04/15
1213
Carlow 3' Bed (KD)
ASSEMBLY INSTRUCTIONS
IMPORTANT
FOR DOMESTIC USE ONLY
PLEASE READ BEFORE YOU CONTINUE FURTHER
CARE AND MAINTENANCE
After unpacking this product please keep the original packaging in case it needs to be returned
for any reason.
Please ensure all fittings and parts are present before commencing with assembly.
We recommend that you lay a blanket or sheet on the floor to avoid damage to both your floor
and the product.
We strongly recommend that you keep children away from your work area.
Assemble this product as close to its final position as possible.
Never drag or push products as this could cause damage to the joints making it inferior.
Do not drag or push items across your furniture as this may cause the surface to scratch.
Do not place this product next to a radiator or in direct sunlight.
Wood is a natural product and may expand if subjected to damp and may shrink or crack if
subjected to heat. Therefore it is recommended that room temperature is maintained, with no
sudden temperature fluctuations.
Make sure any spillage is wiped o ffimmediately.
Do not place hot or chilled items directly on to the surface, use a place mat or marking will
occur.
For general cleaning use a soft cotton or micro fibre cloth, and do not use detergents of any kind.
Do not place on a wet or damp floor as staining may occur to your floor.
From time to time it may be necessary to tighten fittings, regular inspections should be carried
out.
PAGE 1