Seconique Furniture Corona Coffe Table Assembly Instructions Manual

Corona Coffe
Table
ASSEMBLY INSTRUCTIONS
SEC/AY/10/17/SP2
FOR DOMESTIC USE ONLY
PLEASE READ BEFORE YOU CONTINUE FURTHER
CARE AND MAINTENANCE
After inpacking this product please keep the original packaging in
case it needs to be returned for any reason
Please ensure all fittings and parts are present before
Ÿ
commencing with assembly.
We recommend that you lay a blanket or the floor to avoid
Ÿ
damage to both your floor and the product.
We strongly recommend that you keep children awat from
Ÿ
work area.
assemble this product as close to its final position as possible.
Ÿ
Never drag or push products as this could cause damage to the
Ÿ
joints making ir inferior.
do not place this product next to a radiator or in direct sunlight.
Ÿ
Wood is a natural product and may expand if subjected to damp
Ÿ
and may shrink or crack if subjected to head. Therefore it is
recommended that room temperature is maintained, with no
sudden temperature fluctuations.
Make sure any spillage is wiped off immediately.
Ÿ
Ÿ Do not place hot or chilled items directly on to the surface, use
a place mat or marking will accur.
Ÿ For general cleaning use a duster, and do not use detergents of
any kind. However, the surface will need be retreated from time
to time. This can be done by using block wax (unperfumed) and
rubbing it over the whole item.
Ÿ From time to time it may be necessary to tighten fittings,
regular inspections should be carried out.
IMPORTANT