Bissell POWERFORCE 81L8 User Manual page 7

O
perations
Power cord
the power cord is located at the rear of the
vacuum. Gently pull out the power cord,
watching for the yellow line. Stop pulling the
power cord once the yellow line is visible.
there is also a red line, which indicates the
end of the usable cord. Do not pull the power
cord out beyond the red line.
Automatic cord rewind
your vacuum is equipped with an automatic
cord rewind. When cleaning is finished, press
the power button off and grasp the plug to
disconnect from the electrical outlet. Hold the
plug and press the automatic cord rewind
button to rewind the cord automatically.
Power button
turn the power on or off by pressing lightly
downward on the power button ( ).
caUtIon:
before using your vacuum,
make sure that the dust bag
and all filters (pre-motor
and post-motor) are in
place. Do not operate your
vacuum without the dust
bag and filters.
w w w . b i s s e l l . c o m
Automatic
Cord Rewind
Button
caUtIon:
be careful to avoid
injury as cord retracts
very quickly.
Power Button
7