Bissell POWERFORCE 81L8 User Manual page 6

A
ssembling your vacuum
5.
Once assembled, you can store your vacuum
in one of two positions:
a. Storing in the in-use position:
1. T o store with the floor nozzle attached,
insert the storage clip (located on the
back of the floor nozzle) into the
storage slot on the rear of the vacuum.
2. T o store without the floor nozzle
attached, insert the storage clip (located
on the bottom of the telescoping
extension wand) into the storage slot on
the rear of the vacuum.
b. Storing in the upright position:
1. T o store with the floor nozzle attached,
stand the vacuum in the upright
position and insert the storage clip
(located on the back of the floor nozzle)
into the storage slot on the bottom of
the vacuum.
2. T o store without the floor nozzle
attached, stand the vacuum in the
upright position and insert the storage
clip (located on the bottom of the
telescoping extension wand) into the
storage slot on the bottom of the
vacuum.
6
w w w . b i s s e l l . c o m
Storing in the in-use position
a1.
Storing in the upright position
b1.
a2.
b2.