Bissell CLEANVIEW 59M5 User Manual page 8

O
perations
Pet Hair Eraser Floor Nozzle
Use to pick up pet hair from rugs and
carpeted surfaces. Just vacuum like
you normally would. The Pet Hair
Lifter will grab pet hair when you pull
back and it will release the hair and
suction it up when you push forward.
NOTE: Turn the vacuum off before
you flip up or flip down the Pet
Hair Lifter.
1. To vacuum rugs and carpeted surfaces,
flip down the Pet Hair Lifter until it clicks
into place on the front of the Pet Hair
Eraser Floor Nozzle. Then push the
brush switch to the carpet position to
pull the brushes up into the Pet Hair Eraser
Floor Nozzle.
2. To vacuum bare floors, push the brush
switch to the bare floor position to
extend the brushes down from the Pet
Hair Eraser Floor Nozzle. Then flip up
the Pet Hair Lifter by pushing the yellow
release button. This will flip the Pet Hair
Lifter up and out of the way.
8
w w w . b i s s e l l . c o m
Notice:
These tools are designed to remove
pet hair from upholstered or carpeted
surfaces. They should not be used on pets.
1.
Release Button
2.
Tip:
Hair, string and small
objects can block the
hose and tools. Check
them occasionally for
obstructions.
Brush Up
Brush Down