Page 1
AR610 Blue Clean • M AINTENANCE ANUAL Place Stamp Here Warning: This manual must be read before installation or use of the unit. A.R. North America WARNING: This product can PRECAUCIÓN: Este producto puede Attn: Pressure Washer Warranty Department expose you to chemicals including exponerle a los productos químicos...
RESSURE ASHER IMITED ARRANTY This product is under warranty to the original retail consumer against defects in material and workmanship for a period of 1 (one) year and is a complete “bumper to bumper” warranty including the spray gun, the high-pressure hose and all accessories from the date of purchase.
Notes NTRODUCTION The high pressure power-jet cleaner you have purchased is a technologically advanced product designed by one of the leading European manufactures of high-pressure pumps. To obtain the best performance from your unit, read this booklet carefully and follow the instructions each time you use the cleaner.
Page 4
2.1.11 Do not tamper with or alter the calibration of the safety valve. Pos. Code Description Qty. Pos. Code Description Qty. 1340700 Black post. casing 680700 Screw 2.1.12 DO NOT alter the original diameter of the spray head nozzle. 1261560 Screw 480480 O-Ring...
AR610 Always use two hands when operating a pressure washer. This will assure complete control of the equipment. Never test the pressure of the cleaner against any part of the body. Use the trigger lock whenever the spray gun is not being used for cleaning.
3.1.10 Use the cleaner only with accessories and replacement parts The pump does not operate at the prescribed pressure. authorized by the manufacturer. The use of original accessories Sudden changes in pressure. and replacement parts will ensure safe, trouble-free operation. Excess noise.
Page 7
Turn the motor switch to the “0” position. Check that the electrical supply voltage and frequency (Volts/ AR610 models: These cleaners are packaged with a red shipping plug in the pump crankcase, this red plug must be removed and the black dipstick cap installed.
Pull the spray gun trigger; push the switch start the motor. 5.6.1 For increased washing power, use the rotary nozzle kit as follows: 5.6.2 Turn off the high pressure cleaner. 5.3.1 When re-starting the motor, always keep the lance. spray gun trigger compressed. 5.6.4 Turn the high pressure cleaner back on.