Kingfisher H10MGF5U Manual page 15

Important to note :
- The sensor in the heater detects whether a window is open or closed by
measuring abnormal temperature variations. Detection is carried out sev-
eral minutes after the window is opened or closed.
- Detection may be ineffective if these temperature variations are insuffi-
cient or untimely. This is the case where:
- The difference between the indoor and outdoor temperature is insuffi-
cient.
- The heater is too far from the window.
- The temperature gradient in the room does not allow for significant tem-
perature variations in the heater sensor.
- The ambient temperature is not stabilised at least one hour before the
window is opened.
- The temperature setting or mode were modified manually or by a pro-
gramme before or during detection.
VERSION NUMBERS
This menu displays the equipment and software version number.
- Press MENU to access the menus.
- Press ► to select MENU2.
- Press OK to access the secondary menus
- Press ► or ◄ to select the last menu before Out (exit) ; the equipment
version and software version is displayed alternatively.
- Press MENU to exit the menus.
15
Quick start