Table of Contents
Advertisement
With every installation a carbon monoxide detector/ (co) alarm must be installed in the
same room as this stove. See below for advice on positioning.
2.2 INSTALLATION
Ensure all parts are fitted in accordance with the stove installation manual. To make it
easier to handle the stove on installation it may help to remove the baffle plates, bricks
and door. Place these in a secure place to avoid damage and refit after installation.
On completion of the installation and commissioning ensure that the operating
instructions for the stove are left with the end user. The installer must advise the end user
on the correct use and operation of the stove and advice and guidance must be given in
relation to the correct usage of fuel types as recommended in this document. The installer
must also advise the end user on how to light the stove for best results and how to
maintain an optimum burn cycle, in doing so also minimizing the time that the stove door
is open during refuelling.
7
Advertisement
Table of Contents
