BenQ PB6100 Service Manual page 52

ADC layer (Fig-4):
II.
1. ADC Brightness: ADC brightness auto calibration black.
2. ADC Contrast: ADC contrast auto calibration white.
3. ADC Offset RGB: value to tell you calibrate result.
4. ADC Gain RGB: value to tell you calibrate result.
5. Fac Brightness: adjust default brightness value in source PC.
6. Fac Contrast: adjust default contrast value in source PC.
Color layer (Fig-5):
III.
(only available when input source is analog RGB)
(Fig-4) ADC layer
(Fig-5) Color layer
52