Status Messages - BenQ PB2120 User Manual

Status Messages

On Screen Messages
SEARCHING
INPUT SIGNAL
DETECTED,
ACTIVATING AUTO
IMAGE
SYNC IS OUT OF
RANGE
CHANGE THE LAMP,
AND RESET THE
LAMP TIMER
CHANGE THE LAMP,
THE POWER WILL
TURN OFF AFTER 20
HOURS
CHANGE THE LAMP!
Projector is searching for input.
Projector has identified the input signal and is running the
auto image adjustment function.
Input signal frequency exceeds the projector's range.
The lamp has been in operation for 1900 hours. Lamp
replacement is recommended.
The lamp has been in operation for 1980 hours, and the
power will turn off after 20 more hours. Replace the lamp
as soon as possible.
The lamp has been in operation for over 2000 hours, and
the power will turn off automatically in 10 minutes.
Replace the lamp immediately.
BenQ PB2220/ PB2120 User's Guide
Description
Troubleshooting
25