Table of Contents
Advertisement
Power Supply / AV CBA Bottom View < TV/VCR Section >
CAUTION !
Fixed voltage power supply circuit is used in this unit.
If Main Fuse (F2601) is blown, check to see that all components in the power supply
circuit are not defective before you connect the AC plug to the AC power supply.
Otherwise it may cause some components in the power supply circuit to fail.
1-11-48
CAUTION
FOR CONTINUED PROTECTION AGAINST FIRE HAZARD,
REPLACE ONLY WITH THE SAME TYPE FUSE.
ATTENTION : POUR UNE PROTECTION CONTINUE LES RISQES
D'INCELE N'UTILISER QUE DES FUSIBLE DE MEMO TYPE.
4A/125V
RISK OF FIRE-REPLACE FUSE AS MARKED.
"This symbol means fast operating fuse."
"Ce symbole reprèsente un fusible à fusion rapide."
WF21
WF22
WF23
WF18
WF19
PIN 5 OF
PIN 7 OF
PIN 11 OF
PIN 14 OF
PIN 16 OF
CN2402
CN2402
CN2402
CN2402
CN2402
1-11-49
BECAUSE A HOT CHASSIS GROUND IS PRESENT IN THE POWER
SUPPLY CIRCUIT, AN ISOLATION TRANSFORMER MUST BE USED.
ALSO, IN ORDER TO HAVE THE ABILITY TO INCREASE THE INPUT
SLOWLY, WHEN TROUBLESHOOTING THIS TYPE POWER SUPPLY
CIRCUIT, A VARIABLE ISOLATION TRANSFORMER IS REQUIRED.
WF20
PIN 18 OF
CN2402
NOTE :
The voltage for parts in hot circuit is measured using
hot GND as a common terminal.
1-11-50
BTD500F01022-A
Advertisement
Chapters
Table of Contents
