3. Disassembly and Reassembly
This section of the service manual describes the disassembly and reassembly procedures for the LED TV.
This LED TV contains electrostatically sensitive devices. Use caution when handling these components.
WARNING
3-1. Disassembly and Reassembly
1.
Disconnect the LED TV from the power source before disassembly.
2.
Follow these directions carefully; never use metal instruments to pry apart the cabinet.
CAUTION
3.
If there is no additional coment, it is same for all inches.
Description
1
Carefully position the TV so that the
screen is facing downwards.
CAUTION
Make sure to place the TV upon a soft
curved cushion or any material that
will prevent damage to the screen.
2
Remove the screws from the BRACKET-
STAND, LEG (R/L).
•
48" : 4EA
•
55" : 4EA
•
65" : 4EA
3
Remove the ASSY STAND P-BASE.
3. Disassembly and Reassemble
Picture Description
Screws
Torque :
7~8Kgf.cm
6003-001494
M4,L12
3-1