Samsung UN55LS003AF Service Manual page 28

3. Disassembly and Reassemble
Description & Screws
9
Remove the lower 2 screws of ASSY BOARD
FUNCTION.
Remove the ASSY BOARD P-FUNCTION Cable,
then remove the ASSY BOARD P-FUNCTION.
• ASSY BOARD P-FUNCTION Cable
10
Remove the FFC Cables.
• FFC Cables
11
Remove the AC Inlet Cable, then remove the AC
Inlet.
• AC Inlet Cable
12
Remove the ASSY PCB MAIN BOARD.
• Gently lift up (Top Right corner) to release
the lock.
• Use both hands to hold the board and slide
to the left to release the board.
NOTE
When installing the ASSY PCB MAIN BOARD,
verify the board is properly positioned in all 4
mounting slots.
3-4
Locking Fixing Hole
Picture Description
lower 2 screws
ASSY BOARD P-FUNCTION Cable
ASSY BOARD P-FUNCTION
FFC Cables
AC Inlet Cable
AC Inlet
Slide to the left to release the board
Bottom chassis Guide Fixing Hole
Locking