Download Print this page

Vello TV 600 Instruction Manual page 4

2in1 professional show light

Advertisement

Specification:
Voltage: AC 100~250V, 50Hz
Power: 300W
Gray level: 20000
LED Source: TW 0.5w SMD 5730 LED*600PCS,
CW 300pcs*, WW 300PCS
HRI : Ra>95
LED digital display
Color temperature : 3000K-6000K
LED life : more than 50000 hours
Control mode: DMX 512 control, manual, master-slave
Dimmer : 0-100% linear
Housing: aluminum alloy
Channel: 4CH
IP rated: IP20
Size: 590*345*105mm
Weight: 10.25KG
Maintenance:
In order to maintain the best performance and life of the product, please always clean and check the product. It is advisable to clean
up at least once a month. Clean should pay attention to the power is in disconnected state , with a soft cotton cloth wipe soft plate.
Line detection and signal lines should be regularly detected, the test should be carried out by a professionals to maintain.
During the inspection process, be sure to focus on the following points.
1. To ensure that all the power supply is dry, without an exposed.
2. To ensure that all the hanging installation of the relevant screws and components are closely linked, can not appear wear and
corrosion.
3. All cables can not wear and aging phenomenon.
4. Accessories and cable corrosion aging phenomenon, please immediately replace.
5. The product can not be used immediately should be replaced immediately.
Fault diagnosis
The following troubleshooting guide can help you solve some of the simple problems that arise during use. If the reference fails to
solve the problem, please do not disassemble the equipment.
Unauthorized removal of equipment, will no longer be able to enjoy the warranty service provided by the business. Should contact
the local dealer to the designated service point repair or return to the manufacture or maintenance.
This table is in the course of the use of the common problems encountered, you can use the reference.
Note: All information is subject to change without prior notice.

Advertisement

loading