Instructions For Nxx Table Update Form - BellSouth E911 Owner's Manual

CG-EWCG-001
Issue 3, January 6, 2004
Pseudo-ANI records that are not geographically correct for the E911 selective routing tandem may result
in "NO RECORD FOUND" or a wrong ALI display due to improper NPA translation.
5.4

Instructions for NXX Table Update Form

Table C Instructions for NXX Table Update Form
ACTION CODE:
A - ADD Add new information to an existing account, i.e. an additional
C - CHANGE Change information previously submitted, i.e. Contact Name,
N - NEW New Request. Circle NEW if this is the first request OR if
COMPANY NAME:
COMPANY
ADDRESS:
CONTACT NAME:
CONTACT PHONE
NUMBER:
TELCO ID / OCN:
NENA CO.
IDENTIFIER:
EFFECTIVE DATE:
FAX NUMBER:
SERVICE REQUEST
FOR:
Instructions for NXX Table Update Form
Circle the CODE that reflects the purpose of the form being
submitted:
NXX
Phone, etc.
submitting information for a new state.
Enter the Wireless Carrier company name.
Enter the address to be used for correspondence on data issues.
Enter the name of the person responsible for data issues.
Enter the full telephone number of the person responsible for data
issues.
Enter the four(4) digit numeric Telco ID or Operating Company
Number issued by BELLCORE.
Enter the 3-5 character Company ID code registered with NENA
(National Emergency Number Association)
Enter the anticipated date that you will begin sending database
updates. Please note that this form must be submitted no later
than three(3) weeks prior to the implementation of testing, not
submission of data.
Enter the full fax telephone number of the person responsible for
data issues. Error reports and data correspondence will be faxed
to this number.
Circle the state where service will be offered. Please use a
separate form for each state. (SF = South FL, NF = North FL)
- continued -
Wireless E911 Guide
TN Database Updates
Page 27