Table of Contents
Advertisement
I. PRODUCT TECHNICAL DATA:
1 Main body, Assorted metric or imperial nosepieces, 1 Hex wrench,
Set Includes:
1 User's manual, 1 Blow mold case
Hex shank:
6.35mm (1/4")
Rivet Type:
Blind "Pop" Rivet
Weight:
2.0 lbs
Riveting Capability:
Capacity / Limits
Stroke Limit:
Maximum 0.7" ( Y should be less than 1/2" in most cases, beyond 0.6" may cause rivet
mandrel to bottom out inside tool and jam)
Working Torque:
Recommended RPM:
Temperature Range:
Requirements of Driving Tools:
Requirements of electric or
pneumatic driving tool:
BLIND RIVET
ADAPTER KIT
Rivet Size Φ
2.4mm
3/32"
3.2mm
1/8"
4.0mm
5/32"
4.8mm
3/16"
6.0mm
7/32"
6.4mm
1/4"
Refer to section III. Operation Guide (Page 3)
Low speed, driver setting (<600 RPM)
-20~120°C (-4~248°F)
• Adjustable torque setting.
• Chuck capacity of hex 6.35 mm (1/4") shank.
• Minimum 12V for aluminum and steel rivets up to 3/16".
• Minimum 14.4V for stainless steel rivets up to 3/16" and thru 1/4" in aluminum.
• Minimum 16V+ for 7/32" in steel and stainless and 1/4" in steel. (1/4" stainless
mandrel and body is not recommended and may overheat the tool)
• Chuck capacity of hex 6.35 mm (1/4") shank.
• With maximum torque > 190 in/lbs for aluminum and steel rivets up to 3/16"
and 7/32" + 1/4" in aluminum.
• With maximum torque > 330 in/lbs for stainless steel rivets up to 3/16" and
7/32" + 1/4" in steel.
Page 2
Limit
Aluminum Steel/Copper
Y<1/2"
Y
Φ
L
BR7
Stainless Steel
1802031-14
Advertisement
Table of Contents
