Page 2
Please Read instructions fully prior to assembly These products may represent a potential shock or fire hazard if • improperly installed or attached in any way. Products should be installed in accordance with these instructions, current electrical codes and/or the current National Electric Code (NEC). Do not connect directly to high voltage power (120v-277v)! •...
Page 3
Available Neonlyte accessories Aluminium Channel flexible silicone channel Mounting clip Milky Channel Green Channel red channel blue channel...
Page 4
NOTE- Neonlyte is not Field Cuttable factory warranty will be void if any alterations are made. Metal channel installation Step 1- install Neonlyte metal channel to solid structure. Step 2 - Carefully unreel Neonlyte from cardboard reel (Avoid excessive twisting)
Page 5
Step 4 - Install Neonlyte channel into the metal channel by gently pushing into position as shown ( Note: do not pull Neonlyte when installing otherwise excessive length can occur). Step 5 – Connect feed cable to power supply, switch on breaker and...
Page 6
Flexible channel Installation Step 1 - Carefully unreel Neonlyte from cardboard reel (Avoid excessive twisting) Step 2– cut the cable tie holding the Neonlyte cable Step 3- Insert the Neonlyte into the flexible channel...
Page 7
Step 4 – secure the Neonlyte and flexible channel to a solid structure using the mounting clips provided ensuring clip spacing is every 24 inches/2ft Step 5 – Connect feed cable to power supply, switch on breaker and test.
Page 8
VOLTAGE DROP CHARTS For best performance and lumen output, ensure proper wire gauge is installed to compensate for voltage drop of low voltage circuits. Example: 12V Voltage Drop & Wire Length Distance Chart Wire 10 W 20 W 30 W 40 W 50 W 60 W...
Page 9
Thank you for Purchasing Acolyte Products please visit our website for the latest products WWW.ACOLYTELED.COM...
Need help?
Do you have a question about the Neonlyte and is the answer not in the manual?
Questions and answers