With A Vcr - No Cable Box - Panasonic CT-3272S Operating Instructions Manual

0392Eproduction.fm Page 10 Monday, February 26, 2001 5:12 PM
2 T P
UNER ICTURE
2 Tuner Picture In Picture (PIP) Operation (Cont.)

With a VCR - No Cable Box

ANT IN
S-VIDEO
10
I P (PIP) O
N ICTURE
This television includes a two tuner Picture In Picture (PIP) feature. This allows watching two
(2) live broadcasts at the same time without or with an external video source (VCR).
Note: Refer to the FEATURE COMPARISON CHART on page 3 for your television PIP capability.
Connect your television to a VCR, as shown.
TERMINALS ON BACK OF TV
AUDIO
R
TO AUDIO
AMP
2
INPUT
1
Note: The Remote Control must be programmed with the supplied codes to operate the
VCR. See Programming the Remote Control in the Remote Control Quick
Reference Guide.
Procedure
Press the PIP button on the Remote Control to display the PIP frame on screen.
Note: The audio is from the Main Picture only.
To view an external video source in the PIP
• Press the TV/VIDEO button on the Remote Control to select the same video
input to which your VCR is connected.
• Verify the VCR is on.
• Choose channels for the Main Picture by pressing the TV button on the Remote
Control and using the numeric keypad or CH up/down button.
• Choose channels for the PIP frame by pressing the TV button on the Remote
Control and using the PIP Channel up/down buttons.
The SWAP button switches the PIP and
Main Picture source. Press the RECALL
button for on screen PIP and Main Picture
source status.
(C .)
PERATION ONT
VIDEO
L
frame:n3.
SWAP and RECALL Buttons
VCR
VIDEO OUT
ANT IN
L
AUDIO OUT
R
ANT OUT
CABLES NOT SUPPLIED
Incoming
Cable