Philips 19HFL3232D/10 User Manual page 16

Manually adjust picture settings
1
Press MENU.
2
Press to select [Setup] >
[Picture].
3
Press to select the following
settings.
‡ [Smart picture] $FFHVVHV SUHGHÀQHG
smart picture settings.
‡ [Video contrast]: Adjusts the intensity
of video contents, keeping backlight
unchanged.
‡ [Contrast]: Adjusts the intensity of
backlight areas, keeping video contents
unchanged.
‡ [Brightness]: Adjusts the intensity and
details of dark areas.
‡ [Colour]: Adjusts colour saturation.
‡ [Hue]: Compensates for colour variations.
‡ [Sharpness]: Adjusts sharpness in the
image.
‡ [Noise reduction]: Filters and reduces
noise in an image.
‡ [Tint]: Adjusts the colour balance in an
image.
‡ [Custom tint]: Customises tint setting.
(Only available if [Tint] > [Custom] is
selected)
‡ [Digital Crystal Clear]: Fine-tunes each
pixel to match surrounding pixels. This
SURGXFHV D EULOOLDQW KLJKGHÀQLWLRQ LPDJH
‡ [Dynamic contrast]: Enhances
contrast. A [Medium] setting is
recommended.
‡ [Dynamic backlight]: Adjusts
brightness of the TV backlight to
match lighting conditions.
‡ [MPEG artifact reduction]: Smoothes
out transitions on digital pictures. You
can switch this feature on or off.
‡ [Colour enhancement]: Makes colours
more vivid and improves the details
in bright colours. You can switch this
feature on or off.
14 EN
All manuals and user guides at all-guides.com
‡ [PC mode]: Adjusts the picture when a
PC is connected to the TV via HDMI or
DVI.
‡ [Picture format]: Changes the picture
format.
‡ [Picture size]: Adjusts the viewing area.
(when set to maximum, you might see
noise or a rough edge of an image.)
‡ [Horizontal shift]: Adjusts the picture
horizontally for PC-VGA, DVI, HDMI or
YPbPr.
‡ [Vertical shift]: Adjusts the picture
vertically for PC-VGA, DVI, HDMI or
YPbPr.