One 10/100 Base-TX E for PC / LAN connectio on a single twisted copper pair. The DSL line interface supports various ADSL standards, up to ADSL2+ with X8824r+. At the DTE • RFC2684 / 1483 to bri side these CPEs provide one 10/100 Ethernet interface and one •...
X8824r User’s Manual Version 1.0 X8824r User’s Manual 4. Appearance 3. Packaging This package consists of the following items: Front Panel X8824r ADSL device unit RJ-45 Cable RJ-11 Cable AC Adapter Label Status User’s Manual CD Blinking Blinking 9 / 102...
Page 6
X8824r User’s Manual Version 1.0 X8824r User’s Manual 5. Hardware Insta Rear Panel 1. Connect one end X8824r and the ot 2. Use a RJ-45 cable X8824r, and the Ethernet adapter in 3. Use a USB cable X8824r, and the ot 4.
Local Ethernet Port (Telnet) – connect the Ethernet port to your local area network or directly to a PC. “Telnet” Default Mode: Bridge X8824r from any workstation in the LAN. The default local Ethernet IP address is “192.168.1.1”. Local Ethernet Port (Web Browser) – connect the Bridge Mode Setting Ethernet port to your local area network or directly to a PC.
X8824r User’s Manual Version 1.0 X8824r User’s Manual 8. Software Upgrade Chapter 2 You may easily upgrade the embedded software by obtaining the compressed upgrade kit from the service provider then following the steps: Click on the Local Image Upgrade link to upgrade the software Overview on the modem.
X8824r User’s Manual Version 1.0 X8824r User’s Manual 3. Login 4. HOME The window Enter Network Password will pop up while After logging in, the f starting the configuration. With the window open, type admin for tab. Under this tab, t both the Username and the Password.
X8824r User’s Manual Version 1.0 X8824r User’s Manual However, you m WAN Interfaces Displays the WAN interface name, SNTP address. encapsulation type, IP address, subnet Date: Enable thi mask, lower interface, VPI/VCI values, and drop-down list. operational status. Time: Enable thi...
Page 11
X8824r User’s Manual Version 1.0 X8824r User’s Manual If the PC is USB-enabled, you can connect it directly to the ADSL/Ethernet r device's USB port. Only one computer can be connected in this from the LAN manner. external comput You can also use the USB and Ethernet interfaces...
X8824r User’s Manual Version 1.0 X8824r User’s Manual MTU: The Maximum Transmission Unit specifies the size in DHCP Serve bytes of the largest Ethernet packet that the interface will accept. Packets larger than this size will be dropped. Click on the DHCP Click on the Submit button when completed and make sure settings.
X8824r User’s Manual Version 1.0 X8824r User’s Manual An IP address pool typically includes a range private addresses DNS/SDNS: The that you define. LAN administrators often define private IP server to be use addresses for use only on their networks. You can also use from this pool.
X8824r User’s Manual Version 1.0 X8824r User’s Manual 6. WAN Click on the WAN tab to view its sub-menu’s and configure the WAN settings. The five sub-menu’s are: DSL, ATM VC, PPP, EOA, and IPOA. Each sub-menu is described below.
X8824r User’s Manual Version 1.0 X8824r User’s Manual Click on the trash c edit the current interfa Click on the Add butt The devices WAN-si via the DSL port. A lower-level ATM VC interface: The ATM VC interfa using the Asynchron...
X8824r User’s Manual Version 1.0 X8824r User’s Manual Click on the trash c edit the current interfa Click on the Add butt The Point-to-Point P VC Interface: The name of the lower-level interface on used to enable co which this VC operates. The low-level interface names are customers.
Page 17
X8824r User’s Manual Version 1.0 X8824r User’s Manual subject to the m defined in the sof LAN, such as the private interface protections, beca term DMZ (de-m terms, refers to c and in-network a server). Packets from a LAN or e...
X8824r User’s Manual Version 1.0 X8824r User’s Manual After you click on the Ethernet over ATM (EoA) Click on the EOA link to view the RFC1483/EoA configuration table. This table displays EoA information such as: interface name, interface security type, lower interface, config IP, network IP, DHCP, default route, gateway IP, and status.
X8824r User’s Manual Version 1.0 X8824r User’s Manual Lower interface: EoA interfaces are defined in software, IP over ATM and then associated with lower-level software and hardware structures (at the lowest level, they are Click on the IPoA lin associated with a physical port - the WAN port). This field table.
Page 20
X8824r User’s Manual Version 1.0 X8824r User’s Manual and in-network a server). Packets from a LAN or e protection that is terms of restrictiv RFC 1577: Spec complies with th Classical IP and unsure). Lower interface with one or more system.
X8824r User’s Manual Version 1.0 X8824r User’s Manual 7 Bridging 8 Routing Click on the Bridging tab to view its sub-menu’s and configure the bridge settings. The six sub-menu’s are: Bridging, LAN Config, DSL, Click on the Routing tab ATM VC, and RFC 1483 Interface (EoA). The bridging sub-menu is routing settings.
X8824r User’s Manual Version 1.0 X8824r User’s Manual After you click on the Add button, another window will pop-up. Click on the NAT link Network Address Tr private IP addresses address you use on specify exactly how a private IP addresses.
Page 23
X8824r User’s Manual Version 1.0 X8824r User’s Manual b) NAT Rule Entry Local Address F The table displays NAT route configuration. Click on the IP addresses of trash can icon to delete the current rule or click on the Add be translated.
X8824r User’s Manual Version 1.0 X8824r User’s Manual RIP Status: Sele order to use the p Age: This s the a RIP table will ret Click on the RIP link to view the Routing Information Protocol computers. (RIP) Configuration table. Routers on your LAN communicate...
X8824r User’s Manual Version 1.0 X8824r User’s Manual sending packets address as the Firewall packets that use destination addr Click on the Firewall link to view the Firewall Configuration length. table. The Firewall adds security to your network by protecting it DOS Protection from Internet intruders.
X8824r User’s Manual Version 1.0 X8824r User’s Manual public interface EoA, and IPoA IP Filter received on a p restrictive set of f Click on the IP Filter link to view the IP filter configuration table. The Typically, the glo...
Page 27
X8824r User’s Manual Version 1.0 X8824r User’s Manual When a packet matches a rule, it can either be accepted assign rule IDs (forwarded towards its destination), or denied (discarded), 1020) so that yo depending on the action specified in the rule.
Page 28
X8824r User’s Manual Version 1.0 X8824r User’s Manual When a PC user types a domain name into a browser, the PC Blocked Pro must first send a request to a DNS server to obtain the equivalent IP address. The DNS server will attempt to look up...
Page 29
X8824r User’s Manual Version 1.0 X8824r User’s Manual RARP: Reverse Address Resolution Protocol. This IP DDNS protocol provides a way for computers to determine their own IP addresses when they only know their hardware Click on the DDNS address (i.e., MAC addresses). Certain types of computers, entries.
Page 30
X8824r User’s Manual Version 1.0 X8824r User’s Manual is a full DNS s domains you alre complete contro domain, includin automated upda these systems. Wildcard: Specif wildcard DNS rec to the associate record of DNS queries for addre to the same IP yourhost.ourdom...
X8824r User’s Manual Version 1.0 X8824r User’s Manual 10 Admin Click on the Admin tab to view its sub-menu’s and configure the admin settings. The sub-menu’s are: User Config, Commit & Reboot, Local Image Upgrade, Remote Image Upgrade, Alarm, Diagnostics, and Port Settings, System Log, Backup/Restore Config, Management Control, Autodetect, SNMP Config, and Parental Contraol .
X8824r User’s Manual Version 1.0 X8824r User’s Manual 10.2 Commit & Reboot 10.3 Local Image Click on the Commit & Reboot link to view the reboot options. Click on the Local Im This page is used to save the changes into the device’s on the modem.
X8824r User’s Manual Version 1.0 X8824r User’s Manual 10.4 Remote Image Upgrade 10.6 Diagnostics Click on the Remote Image Upgrade link to upgrade the Click on the Diagnos software on the modem. displayed as pass, fa Enter the IP address where the software is located, the name of Click on the Submit b the software, and the User name and password of the site.
X8824r User’s Manual Version 1.0 X8824r User’s Manual 10.8 System Log 10.9 Back/ Restor Click the System Log link to display the system logs. The Click on the Bac System Log displays data generated or acquired by routine configuration data fr system communication with other devices, such as the results system.
X8824r User’s Manual Version 1.0 X8824r User’s Manual When Autodetect is c 10.10 Management control the presence of PP server. In this mode Click on the Management control link to enable access to bridge and a PPPoE configuration manager from the WAN port.
Page 36
X8824r User’s Manual Version 1.0 X8824r User’s Manual Privilege levels are defined by the SNMP communities configured on the modem. A community is a named group of IP 10.13 Parental Co addresses. These addresses identify the hosts that are permitted to act as SNMP management stations for accessing Click on the Parental the MIB.
X8824r User’s Manual Version 1.0 X8824r User’s Manual 2. RFC 1483 Brid Chapter 3 Configuration Table: Protocol RFC148 Quick Protocol Setup WAN IP The ISP address DHCP s Modem IP 192.168 1. Overview Gateway IP None. VPI/VCI 8/81 This chapter provides quick steps on setting up the protocols on this device.
Page 38
X8824r User’s Manual Version 1.0 X8824r User’s Manual 3. Another window will then appear. Enter the VPI/VCI values (8/81) into the VPI and VCI text boxes. Then click on the 6. Click on the Bridging Submit button to confirm the changes.
Page 39
X8824r User’s Manual Version 1.0 X8824r User’s Manual 8. Click on the Admin tab to view its sub-menu’s and configure 3. PPPoE Route the bridging settings, then click on the Commit & Reboot link below it. Configuration Table: Protocol PPPoE LAN IP 192.168...
Page 40
X8824r User’s Manual Version 1.0 X8824r User’s Manual 12. Another window will then appear. Enter the VPI/VCI values 15. Select an interface na (8/81) into the VPI and VCI text boxes. Then click on the 16. Select a protocol: PP Submit button to confirm the changes.
Page 41
X8824r User’s Manual Version 1.0 X8824r User’s Manual 32. Click on the Admin tab to view its sub-menu’s and configure the bridging settings, then click on the Commit & Reboot link 4. RFC 1483 + NA below it. Configuration Table:...
Page 42
X8824r User’s Manual Version 1.0 X8824r User’s Manual 36. Another window will then appear. Enter the VPI/VCI values 40. Click on the Services (8/81) into the VPI and VCI text boxes. Then click on the the NAT settings, the Submit button to confirm the changes.
Page 43
X8824r User’s Manual Version 1.0 X8824r User’s Manual 5. PPPoA Route C Configuration Table: Protocol PPPoA LAN IP 192.168 Modem IP 192.168 Gateway IP Not requ VPI/VCI 8/81 Username From IS 51. Select the Reboot from last configuration option from the...
Page 44
X8824r User’s Manual Version 1.0 X8824r User’s Manual 55. Click on the PPP link in the Routing tab, and then click on the 64. Select NAT Rule En Add button to add a PPPoA configuration. list. Then click on the 65.
Page 45
X8824r User’s Manual Version 1.0 X8824r User’s Manual 74. Select the Reboot from last configuration option from the 6. IPoA Route Con drop down list, and the click on the Commit and Reboot button. Configuration Table: Protocol IPoA Ro LAN IP 192.168...
Page 46
X8824r User’s Manual Version 1.0 X8824r User’s Manual 78. Click on the IPoA link in the Routing tab, and then click on the 7. DHCP Configur Add button to add an IPoA configuration. 88. Click on the LAN tab LAN settings, then cl 89.
Page 47
X8824r User’s Manual Version 1.0 X8824r User’s Manual 96. From the drop down list, select DHCP Server, and click on the 8. NAT Configura Submit button. 99. Click on the Services the NAT settings, the 100. From the NAT Entry.
Page 48
Click on the Submit button to confirm the changes. WAN Interface (ADSL l • One pair (2-wire) loop, 1 Ω line impedance with RJ-11 connector • Compliance of X8824r: ITU-T G.992.1, G.992.2 a ANSI T1.413 Issue 2 • Compliance of X8824r+: ITU-T G.992.1, G.992.2, G.992.3, G.992.5 and AN...
X8824r User’s Manual Version 1.0 X8824r User’s Manual A2. Software Specifications Appendix B – War v1 and v2 • NAT/PAT with extensive ALG supports B1. Product Warranty • ATM cells over ADSL, AAL5 • DNS relay agent • Supports 8 PVCs under •...
Page 50
XAVi Technologies will bill the customer for the product at list price. B3. Out-of-Warranty Repair XAVi Technologies will either repair or, at its option, replace a defective product not covered under warranty within ten (10) working days of its receipt. Repair charges are available from the Repair Facility upon request.
Page 51
X8824r User’s Manual Version 1.0 X8824r User’s Manual Contact Informatio C2. IC CS-03 Notice The Industry Canada label identifies certified equipment. This You can help us serve you certification means that equipment meets certain feedback. Listed below telecommunications network protective, operational, and safety numbers of our offices.
Need help?
Do you have a question about the X8824r and is the answer not in the manual?
Questions and answers