Download Print this page

Coolpad Surf Quick Start Manual

Tgh

Hide thumbs Also See for Surf:

Coolpad Surf HOTSPOT Set Up

The Coolpad Surf Hotspot that was provided by TGH is serviced through Mobile

Citizen.

1. Open the back cover to check

that the battery is installed and to

get your Wifi information.

○ Turn the hotspot faced down.

○ Locate the notch on the bottom

left hand corner.

○ Use your nail or thin flat object

to detach the corner of the

cover

○ Then lift off the rest of the cover

to release it.

Coolpad Surf HOTSPOT

Table of Contents

Need help?

Do you have a question about the Surf and is the answer not in the manual?

Page 1 Coolpad Surf HOTSPOT Coolpad Surf HOTSPOT Set Up The Coolpad Surf Hotspot that was provided by TGH is serviced through Mobile Citizen. 1. Open the back cover to check that the battery is installed and to get your Wifi information.
Page 2 2. Check that your battery is 3. Locate your Wifi information on installed. If not, install it as pictured. the inside of the back cover. On a piece of paper write down ○ the SSID (the name of your wifi network) ○...
Page 3 9. To turn on the hotspot press and hold the Power Button for 3 seconds. 10. When your hotspot is ready to use you should see green lights. 11. You can now connect your computer, tablet and phones to this wifi signal. 12.
Page 4 On Screen Indicators The Network Icon displays your network status. A green light means you have a good connection connection. A yellow light means you have a poor internet connection. A red light means you have no internet connection or no service. The Wifi Signal Icon lights up when you are connected.