Download Print this page

Advertisement

Quick Links

Care Instructions
Covet Desk – designed by Shin Azumi
To prolong the life of the product and retain its appearance and functionality,
we would like to give you some relevant information and care advice:-
This unit is manufactured from solid oak or walnut.
Craftsmen manufacture this product and there is variety between each unit. This is
because wood is a natural product, with natural colour and grain variations.
Natural timber is affected by sunlight; this can can the wood colour to darken.
For this reason (especially if placed in direct sunlight) it is recommended that placing
objects in the same position for long periods of time is avoided. This potential colour
adjustment becomes less relevent as the product ages.
It is recommended that no abrasive cleaners or solvents are used to clean the unit.
Please only use proprietary furniture polishes or alternatively, warm water with
a diluted mild detergent.
Care should be taken when placing items onto the glass top; especially heavy items
that if dropped could cause the glss to shatter.
Two people should lift the glass in order to avoid damage.
Do not put excessive weight on the glass and never sit or stand on the desk.
We thank you for purchasing this product and wish you many years of enjoyable and
functional use.
For more related products please visit: casefurniture.com
Case Furniture Ltd
London, SW18 2HZ
United Kingdom
info@casefurniture.com
www.casefurniture.com
Covet
Desk

Advertisement

loading

Summary of Contents for Case Covet

  • Page 1 Covet Care Instructions Desk Covet Desk – designed by Shin Azumi To prolong the life of the product and retain its appearance and functionality, we would like to give you some relevant information and care advice:- This unit is manufactured from solid oak or walnut.
  • Page 2 Assembly Instructions Step 1. Attach all the cam pins ( tting C) into the pre- tted threaded inserts and tighten with a screwdriver, as shown in detail 1. Step 2. Insert all dowels ( tting A) into the remaining holes as shown in detail 3.