StarTech.com PRESREMOTE Quick Start Manual

Quick-start guide
Wireless Presentation Remote with Laser Pointer - 90 ft.
PRESREMOTE
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
ATTENTION!
Class 2 Laser Product
LASER RADIATION
DO NOT STARE INTO BEAM
WAVELENGTH: 650±20nm
Max optical power: 1mW
Product overview
Front view
Activity LED
Play / ESC button
Last button
Tab button
USB wireless receiver
and storage slot
Side view
Battery bay
For the latest information, technical specifications, and support for
this product, please visit www.StarTech.com/PRESREMOTE
*actual product may vary from photos
Laser pointer button
Blank button
Next button
Enter button
Volume up
Volume down
button button
Packaging contents
• 1 x presentation remote
• 2 x AAA batteries
• 1 x carrying case
• 1 x quick-start guide
Requirements
• A computer with a USB port.
Note: This presentation remote uses generic HID drivers and
is commonly supported on virtually all operating systems. No
additional software or drivers are required.
Battery installation
1. Press down on the battery bay and slide the cover away to reveal
the battery compartment.
2. Insert the included batteries, ensuring the positive (+) and
negative (-) ends of the batteries match the polarity indicators
inside the compartment.
3. Once the batteries are installed, replace the cover by sliding it
back into place.
Connect the remote to your computer
1. Remove the USB wireless receiver from the storage slot.
2. Connect the wireless receiver to a USB port on your computer.
Manual Revision: 10/13/2021