Advertisement
9. When the countdown hits zero, the clock gives intermittent beep sounds
that will stop after 2 minutes if no action is taken. Short pressing any button can
stop the beep sound anytime.
Attention: If you choose to set up another function when a countdown is in action,
the clock shows the setup interface of this function. However, if no action takes
place within 3 seconds, the clock automatically goes back to the countdown
display interface.
When the countdown hits zero, the clock gives beep sound for 2 minutes as
prompt. If any button is pressed during this period, the beep sound stops and the
clock returns to the normal time display interface. If no button is pressed after the
beep sound lasts for 2 minutes, the clock automatically returns to the normal
time display interface.
8. Upper/Lower temperature/humidity alarm settings:
In the time display mode, short press [ALERT] to turn on or off the
temperature/humidity alarm function.
13
Advertisement
