Advertisement
Quick Links
P A R T S L I S T
Item
Qty
Description
A
2
VB30 Standards (Carbon Fiber Poles)
(one with and one without winch)
B
2
VB55P-XX Pole Padding
C
2
VB23 Floor Plates and Sockets
(If Applicable)
D
1
1/8" Allen Wrench
E
4
Cable Covers
Inspect all contents prior to installation. Report any missing parts to dealer immediately.
Read all instructions before proceeding!
1. Remove the VB30 Standards (A)
from the shipping box.
2. Set VB30 Standards (A) into existing
floor sockets or VB23 Floor Plates
and Sockets (C).
NOTE:
The Bison Centerline systems have
been designed to "set and play", after
initial set-up all net height guess work is
eliminated. The outer pole has an
adjustable bottom foot factory pre-set
for 10" floor sockets. Please read and
follow the instructions carefully to make
fine tuning adjustments if needed.
Date: 02/18/16
Rev: 2
Lady CarbonMax Series
SKU: 685s e595 Installation
B.A.
N.J.C.
File:\\bisonserver\publisher\VB3000.pub
Item
Qty
Description
F
1
VB1250K Net (includes storage bag)
G
2
Volleyball Antennas (VB15)
H
4
Rope Ratchets (Provided with Net)
I
1
Attachment Hook
J
2
Nylon Net Collar
K
4
Carabiner
Note Winch
and Guide
Orientation
CORRECT
WRONG
1
Figure 1
Rope Guide
Carabiner (K)
Nylon Net Collar (J)
Winch
VB30 Standard
Adjustable Footpad
Ref#: 960328
Advertisement
Related Manuals for PARK WAREHOUSE Lady CarbonMax Series
Summary of Contents for PARK WAREHOUSE Lady CarbonMax Series
- Page 1 Lady CarbonMax Series SKU: 685s e595 Installation P A R T S L I S T Item Description Item Description VB30 Standards (Carbon Fiber Poles) VB1250K Net (includes storage bag) (one with and one without winch) VB55P-XX Pole Padding Volleyball Antennas (VB15)
- Page 2 Figure 2 Initial Standard Height Adjustment Rope Ratchet (H) 3. Lay the VB1250K Net (F) out finding the end with the factory installed rope ratchet device on the bottom rope. Install the opposite end of the net to the non-winch standard by running the black top rope over the rope guide and attaching the loop to the Attachment Hook (I).
- Page 3 9. Remove VB30 Standards (A) from floor sockets and lay on floor. Measure the distance from the bottom of the pole to the bottom of the adjustable foot pad, write it down. Loosen set screw in the collar of the bottom adjustable foot with the 1/8”...
- Page 4 SIDE BY SIDE COURTS Figure 5 37' CENTER TO CENTER 37' CENTER TO CENTER Custom Floor Socket Sleeves & Deep Socket Adapters 1. If you have purchased the Bison VB3000 for use in existing sockets that are not 3” diameter call Bison Customer Service department at 1-800-247-7668 for custom floor socket sleeves available at no additional cost.