PARK WAREHOUSE 4 & 5 Classic and Hummingbird Gliders Assembly Instructions

A.
E.
C.
D.
INCH
0 1
INSTRUCTIONS: *Always match numbers/letters printed on each individual piece. (1 to 1, 2 to 2, A to A, B to B, etc.)
G.
B.
F.
Step 1 - Fasten
headboard to back
assembly with six 11/2"
screws.
Position back and seat
assembly to prepare
for Step 2.
2 3
4' & 5' Classic and
Hummingbird Gliders
Assembly Instructions
Base Parts List
1 - (A) Back Assembly
1 - (B) Seat Assembly
1 - (C) Head Board
2 - (D) End Piece Assembly
1 - (E) Center Cross Piece
Assembly
4 - (F) Glider Arm Assembly
2 - (G) Leg Assembly
4
Hardware List
6 - 5/16" x 41/2" Bolts
4 - 5/16" x 4" Bolts
6 - 5/16" x 31/4" Bolts
2 - 5/16" x 3" Bolts
8 - 21/2" Screws
6 - 11/2" Screws
18 - 5/16" Nuts
18 - Washers
Step 2 - Attach seat
and back assemblies
with four 31/4" bolts.
Put one in top hole
on each end and two
in center. Secure each
bolt with a washer and
nut.
Position center cross
piece and end piece
assemblies to prepare
for Step 3.
Step 3 - To assemble
glider base, attach
center cross piece to
end piece assemblies
with four 41/2" bolts in
top. Insert four 4" bolts
in bottom, inserted
from bottom up. Secure
with washers and nuts.
continued on back
5 6 7