Table of Contents
Advertisement
TROUBLE SHOOTING
All further inspection, maintenance and repair work must be performed by an authorised
Contact your local authorised service dealer if the problem cannot be solved by yourself!
If the product does not perform properly, makes unusual sounds, the motor does not start or
stop as described, the cutting device does not work properly, or any other irregularity or
malfunction occurs, do not attempt to repair the product by yourself.
PROBLEM
Motor does not start
Loss of motor
performance
Nylon line doesn't
unwind
Only perform the steps described in these instructions!
service specialist!
POSSIBLE CAUSES
No power supply
Machine cable defective
Blade jammed
Too much grass around
spool
Nylon Line used up
Spool blocked
WARNING!
WARNING!
REMEDIAL ACTION
Check fuse / extension lead.
Contact Approved Service Dealer.
Clean exit chute: the blade must rotate
freely. Start on low grass or on the
section of lawn that has already been
mown; correct the cutting height.
Clean spool: the head must rotate
freely.
Cut longer grass in stages to prevent
grass from becoming tangled around
the spool.
Replace the spool
Remove the cause of the blockage.
Advertisement
Table of Contents
