Larson Electronics C1D1-2 Instruction Manual

Explosion Proof Rechargeable White Forklift LED Forward Projection Light
Thank you for your purchase of the Larson Electronics EXHL-TRN-RPS-LE4-FKWL-WHT-M.
IMPORTANT
READ CAREFULLY BEFORE INSTALLING THIS FIXTURE. SAVE THESE INSTRUCTIONS FOR FUTURE
REFERENCE. THE EXHL-TRN-RPS-LE4-FKWL-WHT-M MUST BE WIRED IN ACCORDANCE WITH NATIONAL
ELECTRICAL CODE AND ALL APPLICABLE LOCAL CODES. PROPER GROUNDING IS REQUIRED FOR SAFETY.
WE STRONGLY ENCOURAGE ONLY A LICENSED ELECTRICIAN INSTALL, OPERATE AND MAINTAIN THIS
PRODUCT. IF YOU ARE NOT QUALIFIED OR UNFAMILIAR WITH ANY ASPECT OF THIS INSTRUCTION SHEET,
CONSULT AN ELECTRICIAN. THERE ARE NO SERVICEABLE PARTS INSIDE.
WARNING
TO AVOID THE RISK OF FIRE, EXPLOSION OR ELECTRIC SHOCK, THIS PRODUCT SHOULD BE
INSTALLED, INSPECTED AND MAINTAINED BY A QUALIFIED ELECTRICIAN ONLY, IN
ACCORDANCE WITH ALL APPLICABLE ELECTRICAL CODES.
TO AVOID ELECTRIC SHOCK:
•
BE CERTAIN ELECTRICAL POWER IS OFF BEFORE AND DURING INSTALLATION AND MAINTENANCE.
•
PRODUCT MUST BE CONNECTED TO A WIRING SYSTEM WITH AN EQUIPMENT-GROUNDING
CONDUCTOR.
TO AVOID EXPLOSION:
•
MAKE SURE THE SUPPLY VOLTAGE IS WITHIN THE VOLTAGE RATING.
•
ENSURE THE MARKED T RATING IS LESS THAN THE IGNITION TEMPERATURE OF THE HAZARDOUS
ATMOSPHERE.
•
DO NOT OPERATE IN AMBIENT TEMPERATURES ABOVE THOSE INDICATED ON THE PRODUCT
NAMEPLATE.
•
DO NOT OPERATE IF THE LENS, CORD, SEALS, HOUSING, RECEPTACLES, ETC. IS CRACKED OR
DAMAGED. IF SO, DISCONTINUE USE AND CONTACT MANUFACTURER FOR REPLACEMENT PARTS.
•
ALL FASTENERS SHOULD BE PROPERLY SEATED.
Magnetic Warning
PEOPLE WITH
•
ELECTROMAGNETIC FIELDS IN CLOSE PROXIMITY TO HEART PACEMAKER COULD CAUSE
PACEMAKER INTERFERENCE OR PACEMAKER FAILURE.
KEEP FINGERS AWAY FROM MAGNET WHEN MOUNTING AS INJURY COULD OCCUR.
•
The EXHL-TRN-RPS-LE4-FKWL-WHT-M from Larson Electronics is an Explosion Proof Rechargeable White Forklift
LED Warning Light that produces 2,250 lumens while drawing only 25 watts. Forklift operators may use this compact,
forward projection luminary as a forklift headlight to illuminate the operating area in front of the forklift. This light is also
ideal for providing increased visibility when loading a pallet onto a shelf. The EXHL-TRN-RPS-LE4-FKWL-WHT-M is
Class I, Divisions 1 & 2, Groups B, C, D, Class I, Zones 1 & 2, Groups IIB+H2, IIA, Class II, Divisions 1 & 2, Groups E, F,
G and Class III Divisions 1 & 2 rated for hazardous areas and is listed for use worldwide including the United States,
Canada, Europe and Asia. This explosion proof LED light offers 8 hours of runtime from the 8.8aH lithium ion
rechargeable battery.
Mounting
The EXHL-TRN-RPS-LE4-FKWL-WHT-M uses a magnetic trunnion mount
system that allows the user to mount the light anywhere magnetic that is flat,
and capable of supporting the load of the fixture. The adjustable flat surface
bracket has two set screws on the bracket, allowing operators to loosen the
mounting bracket, adjust the light`s tilt orientation, and re-tighten to hold the
fixture in position.
Larson Electronics, LLC
C1D1-2 - C2D1-2 - Aluminum
Instruction Manual
PACEMAKERS SHOULD
Phone: (800) 369-6671
EXHL-TRN-RPS-LE4-FKWL-WHT-M
CONSULT THEIR
Fax: (903) 498-3364
PHYSICIAN(S) BEFORE
www.larsonelectronics.com
USE.
1 of 2