Step 2 - Cleaning The Mapsight Screen; Step 3 - Removing Dust - GE MapSight Tech Tip

Step 2 - Cleaning the MapSight Screen

Clean the MapSight device screen with the dust free cloth
provided and remove any fingerprints, dirt, and smudges.
After wiping the screen, use an air-blower (as seen in the
photo) or an air compressor to clear away any excess dust.
away dust. Simply turn the device upside down to blow off
the dust.
NOTE: It is very important to remove all dust and fingerprints
from the GE MapSight screen before applying the screen
protector
MS-206-15-08-1.0
Step 3 - Step 3 - Removing Dust
Copyright © 2015 ikeGPS 2