Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for NobleChairs ICON Series
Summary of Contents for NobleChairs ICON Series
- Page 1 ICON Series - Assembly Instructions ICON 系列 快速使用手冊...
-
Page 2: Content Checklist
Read over the manual before you begin. Two people are suggested for assembly. 開始組裝之前請先檢查各部零件是否正常無損壞與齊全並請詳閱本手冊，建議由兩個人以上依照組裝說明步驟進行。 CONTENT CHECKLIST / 內容物 2x Phillips screw Screw Kit: 1x Lumbar Pillow 1x Neck Pillow 十字螺絲 螺絲組 腰枕 頸枕 4x M8 Screw (20mm) (20mm)x4 螺絲 4x Split Washer 彈簧墊圈... - Page 3 TILT MECHANISM INSTALLATION / 多功能底盤安裝 Place the CHAIR BASE upside-down on a soft surface and Install the TILT MECHANISM by diagonally tightening position the TILT MECHANISM in the correct direction. the screws into the CHAIR BASE with the ALLEN KEY. 將座椅反轉坐墊朝下，並將多功能底盤放置在正確的位置。...
-
Page 4: Backrest Installation
CHAIRBASE INSTALLATION / 椅座安裝 Align the top of the HYDRAULICS into the bottom of the Push and sit down to lock it into place. TILT MECHANISM. 將椅座輕放於氣壓棒上，即完成安裝，可坐上椅座確保組裝到位。 將多功能底盤插孔對齊氣壓棒頂端。 BACKREST INSTALLATION / 椅背安裝 Using the ALLEN KEY, unscrew the 4 M8 (30mm) pre-mounted screws and washers on the side of the backrest. 使用六角扳手先移除椅背側邊四顆M8(30mm)螺絲及墊圈。... - Page 5 BACKREST INSTALLATION / 椅背安裝 Starting with the right side, attach the backrest to the metal While firmly pushing SIDE COVERS into place, use the ALLEN KEY brackets with the 4 M8 (30mm) screws using the ALLEN KEY. to secure the SIDE COVERS with the 2 PHILLIPS SCREWS. 將側蓋放至定位，以六角板手及十字螺絲將其安裝於支架上。...
-
Page 6: Armrest Adjustments
4D ARMREST ADJUSTMENTS 4D 扶手調整 Ensure that the armrests are balanced to your liking. If not, Use the appropiate function to adjust the armrests. adjust by loosening and tightening the screws using the ALLEN KEY. 根據手冊的功能說明適度調整扶手到可支撐手肘的舒適位置。 使用六角扳手調整鬆開或固定扶手下方的螺絲，並根據個人喜好將其調 整到舒適的位置；扶手左右二側調整方式皆相同。 Use the right lever to adjust the chair’s height. 使用座椅右側把手來調節座椅到舒適的高度。... -
Page 7: Seating Adjustment
Safety Information & Return/Exchange Policy Keep noblechairs tidy by vacuuming its seams with a crevice tool. The maximum recommended user weight of the ICON Series is up to ‧ Dust regularly using a clean, lint-free, slightly damp soft cloth and wipe 150kg or 330.7 pounds. - Page 8 Email : info@noblechairs.com...